 |
Airtight / Watertight
Includes PRV (pressure relief valve) and gasketing hardware to safely maintain correct pressure differential. Manual release button is recessed below cover rim. Test pressure range is +/- 0.25 PSID (18 mb). |
 |
 |
Card Holder
Metal holder for shipping-card riveted to the exterior of case. Two sizes: 2-3/8" x 5-3/8" (60 x 136 mm) and 4" x 6" (102 x 152 mm). |
|
 |
Casters
Caster mounting system enhances the bottom panel strength of rack cases, while providing the same button release convenience of the FastClip mounting plate system found on Hardigg's single-lid cases. Available in removable or fixed 3.5" or 5" wheel diameters. Includes four casters, two machined aircraft aluminum extrusions, and mounting hardware installed on the case bottom. |
|
 |
Custom Cushioning Systems
To transport non-rackmountable equipment, we custom-design protective foam linings and inserts. Hardigg cushioning systems are available in polyethylene (firmer) and polyurethane (softer) foams. Antistatic versions are also available. This option is a major element in equipping double-lid cases used to transport workstations. |
|
 |
Custom Stenciling
Per MIL-I-43553. Available colors
are Black, White, and Yellow.
Listed below are popular
combinations of the case color
along with the corresponding ink
color. One ink color per case. If
not specified Hardigg will choose
color. Hardigg reserves the right to
choose the stencil text or graphic
size, font and location. |
|
 |
Edge Casters
Set consists of (2) caster/ wheel housings, permanently installed into the edge of the case shell. This option is available on a select list of single lid case sizes. |
|
 |
Extra / Replacement Handles
90° stop metal handles are rated to sustain 150 lbs. of lift. Available in plastic, zinc-plate yellow-chromate, ROHS compliant silver zinc, or stainless steel. |
|
 |
Grab N' Roll
Includes bumpers, telescoping handle and edge casters. (will add about 1 1/2" on the height and about 1" on the width. will add about 8lbs to weight of case). |
|
 |
Grab N' Roll Combination Lock
3 digit combination lock |
|
 |
FlangeMount Cases
Features a molded-in shelf to support your panel-mounted gear. Threaded (1/4-20, UNC-2B threads) inserts in the flange allow easy panel fastening. Options include an aluminum mounting panel as well as a hinged aluminum panel in the case lid. |
|
 |
Forklift Bash Plates
Protects base of container from impact caused during transport via Fork Truck |
|
 |
Forklift Provisions / Skid Runners
Features fork lift skids mounted to base of container. Provides clearance for forklift
tines. Not available for all cases. |
 |
|
 |
Front Labels
To assure that lids are replaced in the proper orientation. A set of two "front" labels is affixed to the case, one on the midsection and one on the lid. |
|
 |
Hardware - Stainless Steel
Upgrade - Standard zinc-plated yellow chromate hardware
(catches, strikes, handles, hinges) is replaced by
stainless-steel (clear passivated finish).
Recommended for applications where standard zincplate
or zinc alloy finishes are not suitable, such as
excessive saltwater or chemical environments. |
|
 |
Hardware - Black Stainless Steel Passivated Finish
Upgrade - Non-reflective hardware. Recommended for applications where the standard zinc-plate or zinc alloy finishes are unsuitable, such as excessive saltwater or chemical environments. |
|
 |
Hardware - Zinc
Standard Hardware on most case sizes; suitable for most applications which excessive saltwater or chemical environments arer not an issue. |
|
 |
Hinged Lid
Features hinges and butterfly latches. Quick ship cases come standard with cable lid stay. |
|
 |
Humidity Indicator
Indicates 20%, 30%, and 40% relative humidity ranges. Three-part face changes color when inside humidity exceeds the indicated level. As humidity decreases, the indicator resets for future use. Recommended for airtight cases only. |
|
 |
ID Plate
I.A.W. MIL-P-15024, Type H, Style IV, Size 10.4 x 4.0 x .020" (102 x 102 x 0.5 mm) thick aluminum, fastener attached to your case. Text font is News Gothic Bold. |
|
 |
Standard Labels
- Up Arrows
- Delicate unit
- Handle with Care / Reusable Container
|
|
 |
Lifting / Tie Down Rings
Welded rings provide hoisting and tie-down attachment points with 2" (51 mm) diameter clearance for hooks. They're spring-loaded and pivot 180° . Available in plated steel or stainless steel. |
|
 |
Lockable Cable Catch
Allows the case to be padlocked shut. Cable is tamper-resistant aircraft steel. Order two per lid. (Padlock not included.) |
|
 |
Lockable Padlock Hasp
Allows the case to be padlocked shut. Cable is tamper-resistant aircraft steel. Order two per lid. (Padlock not included.) |
|
 |
Purge / Fill Valve
Manual pressure equalization or air relief. Furnished
in all brass, nickel plated. Recommended for use on
applications where fast relief or purging with inert gas
is required. Valve stem has internal threads, 5/16-32-
NS. Container installation hole is 9/16" diameter.
Recommended for use with the Fill Valve option.
Hardigg will establish best location to install valve on
the case. |
|
|
