SKB Cases

DJ or Keyboard Controller Soft Case |  1SKB-SC2414  The 1SKB-SC2414 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards. A padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2414 Controller Soft Case will accommodate products such as the Numark NS6 and more. ...

DJ or Keyboard Controller Soft Case |1SKB-SC2714  The 1SKB-SC2714 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards. A padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2714 Controller Soft Case will accommodate products such as the Pioneer DDJ-SX3.

SKB Cases | iSeries Waterproof Three Mic Case | 3i-0907-MC3 9.38" x 7.38" x 6.13" Inside Dimensions The 3i-0907-MC3 allows 3 mics to be stored horizontally. Each microphone cutout measures 1.5" wide by 6.75" long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5" in length. By removing the perforated foam piece near the grill of the microphone you can change the shape from being round to square. This will accommodate other popular hand held...

SKB Cases | iSeries Sennheiser AVX Case | 3i-0806-3-AVX 8.50" x 6.00" x 3.75" Inside Dimensions The iSeries 3i0806-3-AVX case is designed to accommodate the Sennheiser AVX Wireless Audio System. The interior features custom-cut high quality PE foam that will hold the Sennheiser AVX transmitter, receiver, lav mic, and other accessories. There are also two pockets for additional AVX batteries. SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer...

SKB Cases | iSeries RodeLink Wireless Case | 3i-0806-3-ROD 8.50" x 6.00" x 3.75" Inside Dimensions The iSeries 3i0806-3-ROD case is designed to accommodate the RodeLink Wireless Audio System with shoe mount attached. The interior is created with a custom-cut high quality PE foam that will hold the RodeLink RX and TX bodypacks as well as an accessory pocket that will house the lav mic and other accessories. SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer...

Universal Equipment/Mixer Bag |  1SKB-UB2020 SKB’s Universal Mixer/Equipment Bags are the perfect solution for protecting and transporting your gear from one gig to another with sizes to accommodate the most popular mixers, drum machines, recording interfaces, midi controllers, light panels and other equipment. The 1SKB-UB2020 Universal Bag measures 20” x 20” x 5.5” to house some of the larger gear such as, Allen & Heath Zed-14, Mackie Onyx 1620i and Yamaha EMX5014CThe Universal...

Foot Controller Soft Case | 1SKB-SC2709  The 1SKB-SC2709 combines the protective qualities of rigid foam with the style and portability of a canvas bag. A padded interior, padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2709 MIDI Foot Controller Soft Case will accommodate the FCB1010, FC200, MFC10, Fender Cyber Foot, the Line 6 Longboard and more.

Controller Soft Case | 1SKB-SC1913The 1SKB-SC1913 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards. A padded interior, padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC1913 Controller Soft Case will accommodate products such as the American Audio VMS4 MIDI Station controller, Axiom 25 Midi Keyboard and more. ...

Foot Controller Soft Case | 1SKB-SC2111 The SKB-SC2111 Controller Soft Case is designed to fit all-in-one effects floor boards (BOSS GT-10, Digitech RP1000, Line6 X3 Live, Vox Tonelab LE and many more) as well as MIDI foot controllers (Roland FC300, etc.). A rigid EPS foam interior is surrounded by a heavy-duty canvas exterior with an exterior zippered pocket. A removable one inch (1”) pad of convoluted foam in the lid is provided to allow for various product heights. A shoulder...

Controller Soft Case | 1SKB-SC2311 The 1SKB-SC2311 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or small MIDI controller keyboards. A padded interior, padded carrying handle and shoulder strap provide lightweight portability. The 1SKB-SC2311 Controller Soft Case will accommodate products such as the Akai MINIAK Analog Synthesizer or the microKORG Synthesizer Vocoder and more. ...

Controller Soft Case |  1SKB-SC3212 The 1SKB-SC3212 combines the protective qualities of rigid foam with the style and portability of a canvas bag to accommodate popular DJ performance controllers or MIDI controller keyboards. A padded interior, padded carrying handle and shoulder strap provides lightweight portability. The SKB-SC3212 Controller Soft Case will accommodate the M-Audio Axiom 49 MIDI Keyboard Controllers and more. ...

3i-221312BKB Blackmagic URSA Broadcast Camera Case The iSeries 3i-221312BKB was designed to fit the Blackmagic URSA Broadcast Camera and accessories. The case interior features high quality PE foam that's been form cut to fit the camera with fiber converter attached. There are additional pockets for the studio fiber converter box, the URSA viewfinder, and small accessories.  iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer...

SKB Cases | Blackmagic URSA Mini Case | 3i-221312BKU The iSeries 3i-221312BKU was designed to fit the Blackmagic URSA Mini camera and accessories, and features a high quality PE form-cut foam interior with removable foam blocks to accommodate any setting of the camera shoulder mount. Additional pockets provide room for four (4) CFast cards, a pair of 8" and 12" rods, and power supply, as well additional batteries, lenses, or other accessories. The wall joining these accessory compartments can...

SKB Cases | Waterproof Canon C200 Case | 3i-221312CA2 The iSeries 3i-221312CA2 was designed to fit the Canon C200 and accessories, and features a high quality PE foam interior that has been form cut to accommodate the camera with top handle installed. Additional pockets will securely house two (2) batteries, the monitor unit, dual battery charger, power supply, most 13" laptops, documents, and additional accessories. iSeries injection molded waterproof cases are constructed of ultra...

SKB Cases | iSeries  MIL-STD Waterproof Pistol Case | 3i-1209-4SP 12.00" x 9.00" x 4.50" Inside Dimensions SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer polypropylene shell. Features water and dust tight submersible design (MIL-C-4150J), resistant to UV, solvent, corrosion, fungus and impact damage (MIL-STD-810G). Also features molded-in hinge, patent pending "trigger release" latch system, snap-down rubber over-molded cushion grip handle and...

SKB Cases | iSeries MIL-STD Waterproof Pistol Case | 3i-1006-SP 10.75" x 6.13" x 3.25" Inside Dimensions SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer polypropylene shell. Features water and dust tight submersible design (MIL-C-4150J), resistant to UV, solvent, corrosion, fungus and impact damage (MIL-STD-810G). Also features molded-in hinge, patent pending "trigger release" latch system, snap-down rubber over-molded cushion grip handle and...

SKB Cases | ATA Bow/Rifle Transport Case 2SKB-5014The 2SKB-5014 Bow/Rifle Transport Case is made to ATA 300 Category 1 specifications, which is the highest shipping container specification of the ATA. This case is molded from ultra-high density molecular weight polyethylene, the material specified by the U.S. military for cases and containers.

SKB Cases | iSeries AR Rifle Case | 3i-3614-AR 36.50" x 14.50" x 6.00" Inside Dimensions The iSeries 3614 AR Rifle Case is an injection molded watertight case with wheels that features a custom cut, high-density foam interior and is perfect for shorter, tactical, assault type rifles. The interior features a heavy-duty 2 Lb. density closed-cell, recyclable foam with 6 separate cavities to securely hold your AR and all your accessories. The AR cavity has adjustable pull-out foam plugs...

SKB Cases | iSeries AR Rifle Case | 3i-4214-AR 42.50" x 14.50" x 5.50" Inside Dimensions The iSeries 4214 AR Rifle Case is an injection molded watertight case with wheels that features a custom cut, high-density foam interior and is perfect for longer, tactical, assault type rifles.The interior features a heavy-duty 2 Lb. density closed-cell, recyclable foam with 7 separate cavities to securely hold your AR and all your accessories. The AR cavity has adjustable pull-out foam plugs to...

SKB Cases | iSeries 3-Gun Competition Case | 3i-5014-3G 50.50" x 14.50" x 6.00" Inside Dimensions The iSeries 3i-5014-3G 3-Gun Competition Case is an injection molded, watertight case that features a custom foam insert that can accommodate up to three guns, allowing a competitor or shooter to travel without handling multiple cases. The 3i-5014-3G 3-Gun Competition Case holds shotguns up to 48" long, scoped rifles up to 39" long and features adjustable cutout foam to accommodate shorter lengths...

SKB Cases | iSeries Five Handgun Case | 3i-1610-10B-M 16.00" x 10.00" x 10.00" Inside Dimensions The iSeries 1610-10 Five Handgun Case is an injection molded, watertight case featuring a customized high density 2lb closed cell foam interior that accommodates five handguns with designated slots for eight magazines and other accessories. The five-handgun case is a great transport solution for sport enthusiasts, law enforcement, and military personnel alike. SKB iSeries Injection Molded...

SKB  Case | 3i Series MIL-STD Six Handgun Case  | 3i-2011-7B-M 20.53" x 11.53" x 7.51" Inside Dimensions The iSeries 2011-7 Six Handgun Case is an injection molded, watertight case featuring a customized high density 2lb closed cell foam interior that accommodates six handguns with designated slots for twelve magazines and other accessories. The six-handgun case features wheels and a pull handle for easy towing, and is a great transport solution for sport...

SKB Case | iSeries MIL-STD Eight Handgun Case | 3i-2015-10B-M 20.53" x 15.53" x 10.06" Inside Dimensions The iSeries 2015-10 Eight Handgun Case is an injection molded, watertight case featuring customized high density 2lb closed cell foam interiors that accommodates eight handguns with designated slots for twenty-four magazines and other accessories. Foam pockets are designed to accommodate standard automatics and revolvers including 1911 Colt, .45 Beretta , 9m Glock, .357 S&W...

SKB iSeries Utility Case - Tan | 3i-1209-4T-L12.00" x 9.00" x 4.50" Exterior Dimensions SKB 3i Series injection molded Mil-Standard waterproof case with molded copolymer polypropylene shell. Features water and dust tight submersible design (MIL-C-4150J), resistant to UV, solvent, corrosion, fungus and impact damage (MIL-STD-810G). Also features molded-in hinge, patent pending "trigger release" latch system, snap-down rubber over-molded cushion grip handle and automatic ambient...