SKB Cases

SKB | 3i-3614-6-003 | Baseball Bat Case 36.50" x 14.50" x 6.00" Inside Dimensions To maximize the benefits of their latest size of MIL-STD Injection Molded Watertight cases, SKB has developed new interiors for the newest 3i Series case, the 3i-3614-6-003 to accommodate up to 10 Baseball Bats.The iSeries 3614-6 Baseball Bat Case has four (4) SKB patented Trigger Latch® System, four reinforced padlock locations, cushioned snap down handles on three (3) sides and recessed, in-line skate...

SKB Cases | ATA Bow and Rifle Transport Case | 2SKB-5014 The 2SKB-5014 Bow/Rifle Transport Case is made to ATA 300 Category 1 specifications, which is the highest shipping container specification of the ATA. This case is molded from ultra-high density molecular weight polyethylene, the material specified by the U.S. military for cases and containers. Color: Black with layered foam interior Team USA's Official Case SKB has been the official case and gear protector for USA Shooting and USA...

SKB | 2SKB-4220-BT | Bow Traveler Case 42.00" x 20.00" x 13.00" - Inside Dimensions The SKB Bow Traveler provides rigid, padded protection for your bow and accessories in the bottom compartment with room above for clothes and other essentials. The perfect size for today's most popular bows (42 in x 20 in x 13 in). SKB waterproof shipping and utility cases are the perfect solution for storing and transporting your delicate electronics, computers, laptops, weapons, A/V and music equipment, or...

SKB | 3i-4318-BPL | Bowtech iSeries Shaped Bow Case The SKB 3i-4318-BPL is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810H). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure...

SKB Cases | 1SKB-R102W | SKB 10x2 Compact Rolling Rig w/ Wheels The 1SKB-R102W is a standard 10U top and 2U front and rear rack rails. It also includes a new one-touch pull handle and back lid mounted wheels for easy transport, as well as a redesigned exterior that allows this new Rig to easily stack with existing standard Roto-Racks and the recently updated Roto Rolling Racks. Featuring an injection-molded top, the new Rolling Compact Rig also comes standard with TSA-accessible locking...

1SKB-R104W | SKB 10x4 Compact Rolling Rig w/ Wheels The 1SKB-R104W is a 10U slanted top and 4U front rack with wheels, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to...

1SKB-R106W | SKB 10x6 Compact Rolling Rig w/ Wheels The 1SKB-R106W is a 10U slanted top and 6U front rack with wheels, rack case that features steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the AV-8 with the lid closed! The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front, rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to...

SKB Cases | 3i-2424-10DT | iSeries Case w/ Dividers 24.00" x 24.00" x 10.00" Inside Dimensions SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra-high strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J) that is resistant to corrosion and impact damage. Features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, injection molded...

SKB | 3i-3614-CB | iSeries Custom Breakdown Shotgun Case The iSeries 3614 Custom Breakdown Rifle Case features a custom foam base to accommodate 1 receiver and 2 barrels up to 35” long, as well as compartments for choke tubes and shell boxes. The SKB 3i-3614-CB is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage...

SKB | 3i1610-10B-LR | Deep Lure Case 16.00" x 10.00" x 10.00" Inside Dimensions Accommodates lures up to 10" long, with 32 adjustable compartments featuring corrosion inhibitor and bottom drainage holes for easy rinsing. The SKB 3i1610-10B-LR is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810H). Its molded-in...

SKB | 2SKB-1649W | Deluxe Staff ATA Golf Travel Case 49.5" x 12.25" x 16.00" - Inside Dimensions Keep your golf clubs safe with SKB's Deluxe ATA Cart Bag Travel Case. This case can accept drivers up to 49" in length and has been designed to provide maximum protection for the most popular cart bags. This case comes standard with TSA-accessible locking latches and wheels for easy transport.SKB waterproof shipping and utility cases are the perfect solution for storing and transporting your...

SKB | 2SKB-4814W | Deluxe Standard ATA Travel Case 48.75" x 11.125" x 14.25" - Inside Dimensions Keep your golf clubs safe with our Deluxe Standard ATA Golf Travel Case. This case is contoured to fit stand bags and a pair of shoes, carry bags, and drivers up to 48". This case comes standard with TSA-accessible locking latches and wheels for easy transport. SKB waterproof shipping and utility cases are the perfect solution for storing and transporting your delicate electronics, computers,...

SKB | 2SKB-5020W | Double ATA Golf Travel Case 48.5" x 20.00" x 14.5" - Inside Dimensions Designed to accommodate two standard sets of clubs, or a staff bag along with other travel items, this case is molded from ultra-high molecular weight polyethylene, the material specified by the U.S. military for cases and containers. This case is capable of accepting drivers up to 50" in length and with a width of 20".SKB waterproof shipping and utility cases are the perfect solution for storing and...

SKB | 3i-4719-DB | Double Bow/Rifle Case 44.00" x 18.00" x 6.00" Inside Dimensions The 3i-4719-DB Case offers the maximum in protection for two wider parallel limb bows, a bow/rifle combo or up to four rifles. This case can accommodate rifles up to 46" long and has a rigid foam bunk-bed system for protection. Stable positioning and convoluted foam in the lid allow for secure positioning and cushioning of your gear. The SKB 3i-4719-DB is molded of ultra high-strength polypropylene copolymer...

SKB | 2SKB-4114A | ATA Double Bow Case 41.5" x 14.25" x 5.00" - Inside Dimensions The 2SKB-4114A Parallel Limb Bow Case is airline approved made to ATA 300 Category I specifications which is the highest shipping container specification of the ATA. This case is designed to transport two Parallel Limb Bows, or a Parallel Limb Bow and rifle. The case is molded from ultra-high molecular weight polyethylene, the material specified by the U.S. military for cases and containers. The 2SKB-4114A...

SKB | 3i-3614-CBD | iSeries Double, Custom Breakdown, Black The iSeries 3614 Double Custom Breakdown Rifle Case features a custom foam base to accommodate two barrels and two receivers up to 35". The SKB 3i-3614-CBD is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810H). Its molded-in hinges, patented "trigger...

SKB | 3i-4217-RC | iSeries | Double Recurve Bow Case The new 3i-4217-RC is the ultimate transport solution for 2 recurve bows. Featuring watertight, military-grade construction, this case fits 2 take-down recurve risers up to 25" and 2 sets of limbs up to 71", and also provides storage for arrow quivers and stabilizers up to 38" long. (plastic accessory boxes not provided) The SKB 3i-4217-RC is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and...

SKB | 2SFR-5013 | Double Rifle Case, Black 50.00" x 13.875" Inside Dimensions The SFR 5013 Double Rifle Case is the perfect example of affordable innovation from SKB. It features a foam interior to accommodate two rifles up to 50" long and 13" wide, with EPS lid and base inserts for additional structural integrity and durability, along SKB's unique Perfect Match Valance Bending System for a perfect seal, and beefy injection molded latches reflect rugged construction. The 2SFR-5013 Double Rifle...

SKB | 3i-5014-DB | iSeries | Double Rifle Case 48.00" x 13.75" x 3.00" Inside Dimensions The interior of the 3i-5014-DB MIL-STD Watertight Injection Molded Double Rifle case interior measures 50" x 13.5" x 6" and features a bunk-bed storage system with rigid foam dividers to provide separate compartments with convoluted foam in the lid for stable positioning of two rifles. The SKB 3i-5014-DB is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and...

SKB | 3i-5014-DB-T | iSeries | Double Rifle Case 48.00" x 13.75" x 3.00" Inside Dimensions The interior of the 3i-5014-DB MIL-STD Watertight Injection Molded Double Rifle case interior measures 50" x 13.5" x 6" and features a bunk-bed storage system with rigid foam dividers to provide separate compartments with convoluted foam in the lid for stable positioning of two rifles. The SKB 3i-5014-DB-T is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof...

SKB | 3i-5014-DB-M | iSeries | Double Rifle Case 48.00" x 13.75" x 3.00" Inside Dimensions The interior of the 3i-5014-DB MIL-STD Watertight Injection Molded Double Rifle case interior measures 50" x 13.5" x 6" and features a bunk-bed storage system with rigid foam dividers to provide separate compartments with convoluted foam in the lid for stable positioning of two rifles. The SKB 3i-5014-DB-M is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof...

SKB | 3i2317-LT6 | Field-Ready iSeries Laptop Case 23.00" x 17.00" x 14.00" Inside Dimensions The SKB 3i-2317-LT6 is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810H). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking,...

SKB Cases | Field-Ready iSeries Starlink MINI Antenna Travel Case | 3i-1711-SLM 17.00" x 11.50" x 6.00" Inside Dimensions The SKB 3i-1711-SLM is molded of ultra-high strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810H). Its molded-in hinges patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion...

SKB | Field-Ready iSeries Case for Two 6-Unit Motorola Chargers 22.00" x 17.00" x 12.26" Inside Dimensions The SKB 3i-2217-MC6 is molded of ultra high-strength polypropylene copolymer resin and features a gasketed, waterproof and airtight, submersible design (IP67 and MIL-C-4150J) that is resistant to UV, solvents, fungus, corrosion and impact damage (MIL-STD-810H). Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle,...