SKB Cases

SKB Cases | 6U Roto Rolling Rack Case | 1SKB-R6UW The SKB 6U Roto Rolling Rack is designed to stack with SKB standard and shallow racks. The 1SKB-R6UW features four military grade butterfly latches to secure each lid, internal rubber gaskets that keeps water out so sensitive electronics stay safe and secure in transport, a one-touch pull handle, back lid mounted wheels for easy transport, and threaded steel rails.

SKB Cases | 8U Roto Rack Case | 1SKB-R8U The SKB 8U Roto Rack has an exterior design that includes a recognizable bar design that signifies the rack size on the front and rear covers with interlocking capabilities for a secure stack with Roto Racks and the new Roto Shallow Racks. This rugged rack mount shipping case has a rotomolded polyethylene body with stackable design, front and rear removable lids (2.0" deep each), heavy-duty flush handles, Mil-Spec black twist hasp latches and shock...

SKB Cases | 8U Roto Rolling Rack Case | 1SKB-R8UW The SKB 8U Roto Rolling Rack is designed to stack with SKB standard and shallow racks. The 1SKB-R8UW features four military grade butterfly latches to secure each lid, internal rubber gaskets that keeps water out so sensitive electronics stay safe and secure in transport, a one-touch pull handle, back lid mounted wheels for easy transport, and threaded steel rails.

SKB Cases | MIL-STD Waterproof Shipping Case 2R4417-8B 2R Series rotomolded Mil-Standard case made with LLDPE Polyethylene shell, features gasketed, watertight design (MIL-C-4150J). Also features lid with stainless steel hinge; Rubber over-molded tow handle and carry handle; Recessed, black powder coated stainless steel, twist latches; Automatic ambient pressure equalization valve (MIL-STD-648C and IP67); Resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810H). ATA 300...

SKB Cases | MIL-STD Waterproof Shipping Case 2R4909-5 These Mil-Standard cases were designed to meet the most demanding military specifications, they are roto-molded for strength and durability, airtight and water proof with solid stainless steel latches and hinges that will withstand the most demanding shipping conditions. The 2R Mil-Std. Cases are molded of (LLDPE) polyethylene impact resistant / UV stabilized material and meet or exceed MIL-STD 810 and MIL-C-4150J specifications. ATA...

SKB Cases | MIL-STD Waterproof Shipping Case 2R5212-7 2R Series rotomolded Mil-Standard case made with LLDPE Polyethylene shell, features gasketed, watertight design (MIL-C-4150J). Also features lid with stainless steel hinge; Rubber over-molded tow handle and carry handle; Recessed, black powder coated stainless steel, twist latches; Heavy duty, built-in wheels; Automatic ambient pressure equalization valve (MIL-STD-648C and IP67); Resistance to UV, solvents, corrosion, fungus and impact...

SKB Cases | MIL-STD Waterproof Shipping Case 2R6416-8B 2R Series rotomolded Mil-Standard case made with LLDPE Polyethylene shell, features gasketed, watertight design (MIL-C-4150J). Also features lid with stainless steel hinge; Rubber over-molded tow handle and carry handle; Recessed, black powder coated stainless steel, twist latches; Heavy duty, built-in wheels; Automatic ambient pressure equalization valve (MIL-STD-648C and IP67); Resistance to UV, solvents, corrosion, fungus and impact...

SKB Cases | 3i-0907-4 & 3i-0907-6 Panel Ring Kit | 3i-0907-PRK The SKB 3i-0907-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for 3i-0907-4 and 3i-0907-6 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1006 Panel Ring Kit | 3i-1006-PRK The SKB 3i-1006-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1006 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1209 Panel Ring Kit | 3i-1209-PRK The SKB 3i-1209-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1209 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1309 Panel Ring Kit | 3i-1309-PRK The SKB 3i-1309-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1309 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1510 Panel Ring Kit | 3i-1510-PRK Fits 3i-1510-4, 3i-1510-6 and 3i-1510-9 The SKB 3i-1510-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1510 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1610 Panel Mounting Ring Kit | 3i-1610-5-PRK The SKB 3i-1610-5-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1610 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1706 Panel Ring Kit | 3i-1706-PRK The SKB 3i-1706-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1706 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1711 Panel Ring Kit | 3i-1711-PRK The SKB 3i-1711-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1711 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1717 Panel Ring Kit | 3i-1717-PRK Fits 3i-1717-10 and 3i-1717-16 The SKB 3i-1717-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1717 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1813 Panel Ring Kit | 3i-1813-PRK Fits 3i-1813-5, and 3i-1813-7 The SKB 3i-1813-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1813 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-1914 Panel Ring Kit | 3i-1914-PRK Fits 3i-1914-8 and 3i-1914N-8 The SKB 3i-1914-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-1914 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-2011 Panel Ring Kit | 3i-2011-PRK Fits 3i-2011-7 and 3i-2011-8 The SKB 3i-2011-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-2011 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 3i-2015 Panel Ring Kit | 3i-2015-PRK Fits 3i-2015-7 and 3i-2015-10 The SKB 3i-2015-PRK panel mounting rings enable the attachment of an interface panel* that sits flush with the rim for all 3i-2015 cases. The kit includes a panel ring, dill jigs/templates, a drill bit, rubber gasket, and mounting hardware. *Panel not included.

SKB Cases | 10U 10” iSeries Injection Molded Fly Rack Case | 3i-22221210U The SKB injection molded waterproof Fly Rack Cases are lighter in weight and more affordable than previous models, all without compromising strength or durability. Rack frames are removable and fit easily into SKB's iSeries cases, where they are protected by high quality polyethylene (PE) foam that provides space for protruding knobs and buttons. At less than half the weight of standard shock racks, SKB Fly Racks feature...

iSeries HD73 Small Replacement Colored Handle Available in five colors, (BE) blue, (RD) red, (GN) green, (OR) orange, and (YW) yellow. Small Colored Handle is 4.875" long.  Easy to install kit includes instructions and new mounting pins. Compatible with the following 3i Series cases: 3i-0806-3, 3i-1006-3, 3i-0907-4, 3i-0907-6, 3i-1309-6.

iSeries HD80 Medium Replacement Colored Handle Available in five colors, (BE) blue, (RD) red, (GN) green, (OR) orange, and (YW) yellow. Medium Handle is 6.75" long. Easy to install kit includes instructions and new mounting pins.Replaces the front handle on the following iSeries cases: 3i-1510-4, 3i-1510-6, 3i-1510-9, 3i-1515-6, 3i-1610-5, 3i-1610-10, 3i-1706-6, 3i-1711-6, 3i-1717-10, 3i-1717-16, 1813-7, 3i-1914-8, 3i-3614-6, 3i-3913-12 The 3i-HD Medium Colored Handle will...

iSeries HD81 Medium Replacement Colored Handle Available in five colors, (BE) blue, (RD) red, (GN) green, (OR) orange, and (YW) yellow. The 3i-HD81 Large Colored Handle is 8.625" long. Easy to install kit includes instructions and new mounting pins.Accommodates the following iSeries cases: 3i-1914N-8, 3i-2011-7, 3i-2011-8, 3i-2011-10, 3i-2015-7, 3i-2015-10, 3i-2015-14, 3i-2215-8, 3i-2217-8, 3i-2217-10, 3i-2217-12, 3i-2222-12, 3i-3016-10, 3i-3613-12, 3i-4214-5, 3i-4217-7, 3i-4909-6,...